Cetop 2 - AD2E - Standard DCV
- Single or double acting solenoid
- DC Solenoid 12V/24V/28V/48V/102V/205V
- Manual override
- Emergency button & rotary button
The Aron directional control valves NG4 are designed for sub-plate mounting with an interface in accordance with UNI ISO 4401 - 02 - 01 - 0 - 94 standard (ex CETOP R 35 H 4.2-4-02), and are the smallest on the market in their category whilst still featuring excellent performance. The use of solenoids with wet armatures ensures quiet operation and means that dynamic seals are no longer required and important levels of counter-pressure are accepted on the return line. The solenoid's tube is screwed at the valve body directly, while a locking ring nut, seals the coil in right position. The body is cast with great care in the design and production of the ducts of the 5 chambers which have made it possible to improve the spools allowing relatively high flow rate with low pressure drops. The spool rest positions are obtained by means of springs which centre it when there are no electrical impulses. The solenoids are constructed to DIN 40050 standards and are supplied by means of DIN 43650 ISO 4400 standard connectors which, suitably assembled; ensure a protection class of IP65. The solenoid coils are normally arranged for DIN 43650 ISO 4400 type connectors (standard version). On request, can be made available with the following coil connection variants: AMP Junior connections; flying leads connections, with or without integrated diode; Deutsch connections with bidirectional integrated diode. The supply may be in either DC or AC form (with the use of a connector and rectifier) in most common voltage. The valves are designed for use with DIN 51524 standard hydraulic mineral oils and it is recommended that filters should be fitted to ensure a maximum contamination level of class 10 in accordance with NAS 1638, ß25≥75.
|Cetop 2 - NG4 Technical Information.pdf (148.64 KB)|