Cetop 3 - AD3P - Pneumatic Operated
- CETOP 3 - NG 6
- Pressure max. P/A/B - 320
- Operating pressure max. - 200
- Pressure max. T - 160
- Max. Flow - 60 lpm
The Aron directional control valves NG6 are designed for subplate mounting with an interface in accordance with UNI ISO 4401 – 03 – 02 – 0 – 94 standard (ex CETOP R 35 H 4.2-4-03). They can be used in all fields on account of their high flow rate and pressure capacities combined with compact overall dimensions.
The use of solenoids with wet armatures allows a very practical, safe construction completely dispensing with dynamic seals; the solenoid tube is screwed directly onto the valve chest whilst the coil is kept in position by means of a lock nut.
The special, precise construction of the ports and the improvement of the spools enables relatively high flow rates to be accommodated with a minimal pressure drop. The operation of the directional valves may be electrical, pneumatic, oleodynamic, mechanical or lever.
The centre position is obtained by means of calibrated length springs which reposition the spool in the centre or the end of travel position once the action of the impulse is over.
|AD3O AD3P.pdf (186.77 KB)|