Home » Fluid Power » Hydraulic Valves » Cetop Valves » Electronics » REM.D.RA - Regulators for Double Solenoid Proportional Control Valves

REM.D.RA - Regulators for Double Solenoid Proportional Control Valves


  • Power supply - 10V to 30V DC
  • Maximum supply voltage - 36V

The electronic control card type REM.D.RA has been designed to drive the ARON double solenoid proportional valves series “XD.*.C.. and XDP.3.C” without integral position transducer. The control card is enclosed in an “UNDECAL” type housing, a typical relay mounting standard. The output stage operates on the pulse width modulation principle (P.W.M.) and is provided with current feedback in order to obtain a solenoid output current proportional to the reference input signal. Output short circuit and supply polarity inversion protection is provided.

Gain, minimum current and rise and fall ramp time adjustments are possible through the corresponding front panel trimming potentiometers, while the output current to the solenoid can be measured via the Valve Current test points, and the ramp operation can be excluded. The product incorporates a serial interface for adjustment of parameters.

application/pdf REM.D.RA.pdf (265.7 KB)
Dana SAC Ireland Ltd
Dana Incorporated, Allenwood Enterprise Park, Allenwood, Naas, Kildare, W91A4CP, Ireland.
Facebook - WhiteYoutube - WhiteLinkediIn - White
Phone: +353-45-890100
Email: ireland.sac@dana.com
© 2020 Dana SAC Ireland Ltd