Home » Fluid Power » Hydraulic Valves » Cetop Valves » Pressure Control » V.*.L 25 - Pressure Control Valve In Line

V.*.L 25 - Pressure Control Valve In Line

Highlights

  • In Line Mounting NG25
  • Maximum flow 350 lpm
  • Maximum pressure 400bar
  • Three setting ranges 45 - 145 -400 bar
  • Ports Pressure 1 “& Tank 1 1/4 ” BSP

These pressure control valves are available in the basic VMP* maximum pressure, VSP* sequence and VUP* exclusion versions, with a single pressure value and three calibration ranges that cover the band 15 ÷ 400 bar. It is possible to use auxiliary pilot valves, which can be the simple standard AD3E solenoid valve, by the mere exchange of covers. These valves have been fitted with an important safety feature for the operation of the system where they are used; a mechanical end of stroke stop prevents the operator from setting pressure values higher than those specified in the catalogue (it is impossible to compress the spring completely). In the standard configuration these valves are supplied with a 1.6 bar main spring and with calibrated diameter 1 mm pilot feed orifice (variant part No. 00). Subplate mounting valves are suitable for covers which do not conform to DIN standards type C*P 13/25.. whilst in line mounting valves are suitable for DIN standard covers type KEC 16/25…

Subscribe to our newsletter
Dana SAC Ireland Ltd
Dana Incorporated, Allenwood Enterprise Park, Allenwood, Naas, Kildare, W91A4CP, Ireland.
  
Facebook - BlueYouTube - BlueLinkedIn - UpdateFacebook - WhiteYoutube - WhiteLinkediIn - White
Phone: +353-45-890100
Email: info@brevini.ie
© 2018 Dana SAC Ireland Ltd